eSUN ePLA-LW 1.75mm 1KG 3D Printer Filament

eSUN ePLA-LW 1.75mm 1KG 3D Printer FilamentLight weight PLA filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. ePLA LW use active foaming technology to achieve lightweight, low density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0. 54g cm3. Foaming makes the layered pattern almost invisible, and the surface of the printed item is

Light weight PLA filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. ePLA-LW use active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3.

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight PLA filament enables model aircrafts to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

eSun ePLA-LW Features：

• 【Application】Active foaming technology is used to realize light weight and low density PLA parts, specially designed for the fields of model aircraft, drones and COSPLAY.
• 【Lighter weight】Under the same model and at the same speed, ePLA-LW enables the model aircraft to have a lighter wing load and a lower stall speed.
• 【More savings】Printing the same volume model, 1 roll of ePLA-LW can be used as 2 rolls of normal PLA, which saves 55% of the filaments compared with normal PLA.
• 【Excellent printing effect】Basically invisible layer pattern ,excellent matte and delicate effect after printing.It’s easy to paint and the surface pigment has strong adhesion.
• 【Vacuumed Sealed Packaging】Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D  models.

Model: eSun ePLA-LW
Diameter Format: 1.75mm
Net Weight: 1kg
Printing Temperature: 190-270℃ 
Bed Temperature: 45-60℃
Density: 1.21 g/cm3
Tensile Strength: 32.2 MPa
Elongation at Break: 68.9%
Flexural Strength: 41.31 MPa
Flexural Modulus: 1701 MPa
IZOD Impact Strength: 8.58 KJ/m²
Melt Flow Index (g/10min): 8.1 (190℃/2.16kg)
Heat Distortion Temperature: 53 (℃, 0.45 MPa)
Tolerance: ±0.03mm
Certificate: RoHS, Reach, TDS, MSDS
Packaging: Vacuum packed with silica desiccant
Warranty: 1 Year